同雪网 SkiChinese.com 北美滑雪论坛

 找回密码
 注册

Login

免注册即享有会员功能

搜索
楼主: firehwak2018
打印 上一主题 下一主题

Advanced Parallel

[复制链接]
11#
发表于 2013-3-18 14:34:06 | 只看该作者
http://www.snowpro.com/docs/en/C ... KI_Course_Guide.pdf

Intermediate Parallel Turns:
Control in symmetrical/rhythmical parallel turns on intermediate terrain (blue/black):
〉 Maintains Intermediate speeds;
〉 Centred, mobile stance;
〉 Direction change initiated by lower body;
〉 Steering adjusted to terrain and speed;
〉 Manages upper/lower body separation.

Advanced Parallel:
Linked and efficient parallel turns executed at a faster speed on groomed advanced (blue / black) terrain:
〉 Show the application of the technical principles as defined in basic parallel at advanced speed;
〉 Fluid, linked movements carrying momentum from phase 3 to phase 1;
〉 Control and direct the energy of ski reaction to maximize gliding on the edges.

点评

想看懂,先入党,呵呵  发表于 2013-3-18 14:38
膜拜大侠, 这个写的啥呀, 看不懂耶  发表于 2013-3-18 14:36
again, 党章就是要让你看不懂的  发表于 2013-3-18 14:35
12#
发表于 2013-3-18 14:39:06 | 只看该作者
Advanced Parallel有没有Steering的成分?
如果按照纯CARVING的定义,应该是没有或者极少。

点评

我认为有, 而且很有  发表于 2013-3-18 14:39
13#
 楼主| 发表于 2013-3-18 14:43:02 | 只看该作者
Advanced Parallel 其实就是Carving, 从头到尾都走在刃上。 入弯早立刃,内倾,对板刃加压。 逐渐增加angulation和立刃角度,避免任何pivoting,最后靠反弹出弯。

以上若有错请大侠们指正解释。

点评

要么你问第六条说法你不懂,要么"第三条没必要"要么你想搞十四条,都是可以的  发表于 2013-3-19 00:13
不对,不对。你这学习方法有问题。  发表于 2013-3-19 00:10
要多请教,询问高人。 自己瞎琢磨的是野路子,要不得  发表于 2013-3-19 00:01
哎,不是让你看党章吗?  发表于 2013-3-18 23:53
那求凤凰大侠指点一下,到底什么是advanced parallel呢?  发表于 2013-3-18 22:20
举个最简单的例子:比如说在Vail这些雪场的Back Bowl,全是Powder,你如何Carving?但是高手一样可以execute Advanced Parellel  发表于 2013-3-18 22:07
不对,虽然A P很多时候在Groom的雪道上表现形式为Carving, 但是Advanced Parallel绝对不等于Carving  发表于 2013-3-18 22:05
悬在那里, 何处不理解?  发表于 2013-3-18 14:49
所以不能看党章啊,写的太悬了,得让党里的大侠们来指点迷津了。 我看着跟Carving挺像的  发表于 2013-3-18 14:47
你的话自己总结的, 党章上没有这些话  发表于 2013-3-18 14:45
14#
发表于 2013-3-18 14:49:08 | 只看该作者
本帖最后由 KuoiGuaBoarder 于 2013-3-18 14:50 编辑
firehwak2018 发表于 2013-3-18 14:43
Advanced Parallel 其实就是Carving, 从头到尾都走在刃上。 入弯早立刃,内倾,对板刃加压。 逐渐增加angu ...


党才不管你有没有板刃加压, 但是党要求你

Advanced Parallel:
Linked and efficient parallel turns executed at a faster speed on groomed advanced (blue / black) terrain:

  • 〉 Ski consistently parallel on advanced terrain at faster speeds.
  • 〉 Adjust technique to a variety of turn types, speed and snow conditions.
  • 〉 Adjust skills and technique to advanced bumps and varied terrain.
  • 〉 Balance against the turning forces to create pressure.
  • 〉 Regulate pressure and maintain snow contact through flexion/extension movements.
  • 〉 Balance on the edges above the fall line.
  • 〉 Adjust skills to provide technically sound demonstrations which are easy to copy.
  • 〉 Direction change initiated by lower body;
  • 〉 Steering adjusted to terrain and speed;
  • 〉 Manages upper/lower body separation.
  • 〉 Show the application of the technical principles as defined in basic parallel at advanced speed;
  • 〉 Fluid, linked movements carrying momentum from phase 3 to phase 1;
  • 〉 Control and direct the energy of ski reaction to maximize gliding on the edges.


给你一改, 就变味了

点评

不是好像,是就是,你肯定没好好看,才会这么问  发表于 2013-3-18 20:34
俺好像之前说的是General Carving~不是CSIA的adv parallel~  发表于 2013-3-18 20:10
长见识了。  发表于 2013-3-18 20:09
谢谢。  发表于 2013-3-18 20:09
15#
发表于 2013-3-18 14:49:09 | 只看该作者
俺咋觉得高级平行弯里carving基础上, steering的成分很强呢, 甚至我觉得越强越advance, 拙见请指正.
16#
 楼主| 发表于 2013-3-18 14:50:41 | 只看该作者
KuoiGuaBoarder 发表于 2013-3-18 14:49
党才不管你有没有板刃加压, 但是党要求你

General performance criteria:

“Control and direct the energy of ski reaction to maximize gliding on the edges.”

你看,这个不就是CARVING嘛   我只不过是换了个说法而已

哪位高人能帮忙指点一下呢。。

点评

why do you have to be 颠起来  发表于 2013-3-20 10:14
雪道上有包, 你被颠起来,落地歪了, 不能叫direct吧. 好多呢, 党章可复杂了  发表于 2013-3-18 14:53
Carving根据加压的不同,完全可以control and direct的~  发表于 2013-3-18 14:52
黑道上你卡失速了, 就不能叫control, 是吧.  发表于 2013-3-18 14:52
Control and direct  发表于 2013-3-18 14:51
17#
 楼主| 发表于 2013-3-18 14:51:56 | 只看该作者
这几点要求CARVING也全都能做到啊~
Steering本来就是统称拐弯,可以pivot可以走刃,可以混合。

点评

why do you have to be 颠起来?  发表于 2013-3-20 10:14
写了10条,剩下3条要写就是虚的了  发表于 2013-3-18 15:39
你给写个13条描述一下啥是carving, 啥不是carving  发表于 2013-3-18 14:55
你给写个13条描述一下啥是carving, 啥不是carving  发表于 2013-3-18 14:55
18#
 楼主| 发表于 2013-3-18 14:58:41 | 只看该作者
那俺又晕了。。。。。到底什么是Advanced Parallel呢? 又是什么CSIA才有的神器么?

我还是觉得就是Carving

点评

my understanding is CSIA Advanced Parallel = PMTS Brushed Carving  发表于 2013-3-20 10:15
只不过可以再Carving中增加一点Pivoting之类成分的组合,随时可以改变板子的方向,增加versatility  发表于 2013-3-18 14:59
19#
发表于 2013-3-18 15:00:46 | 只看该作者
firehwak2018 发表于 2013-3-18 14:51
这几点要求CARVING也全都能做到啊~
Steering本来就是统称拐弯,可以pivot可以走刃,可以混合。
...

以APSI为例,分carved turn 和 pure carved turn, 可见http://www.apsi.net.au/media/2286/winter_2011_snowpro.pdf 5到6页
前者ROTATE成分多,后者视频:

我觉得adv. P 是一种以CARVING技术,动态要求为基础,加入了STEERING的成分对速度控制的更好的滑发(不然没法在双黑CARVING,在双黑纯CARVING应该是运动员的活计。
20#
 楼主| 发表于 2013-3-18 15:05:48 | 只看该作者
chalpha 发表于 2013-3-18 15:00
以APSI为例,分carved turn 和 pure carved turn, 可见http://www.apsi.net.au/media/2286/winter_2011_s ...

嗯, 陡坡上会有pivoting的成分:
http://www.youtube.com/watch?v=mWn-cdpx1_s
见SM的回复中写道:

At 9 seconds ish in the video i do start to make more of an effort to steer the skis (more pivot above the fall line than edging) to keep the turn shape tighter in the steeper part of the run



很有趣的是,我觉得Sebastien Michel 在TC的滑法跟PSIA的 Jonathan Ballou 很像。 或许CSIA的Advance Parallel就是PSIA的Dynamic Parallel呢
您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|手机版|小黑屋|SkiChinese  

GMT-5, 2025-11-8 05:25 , Processed in 0.034379 second(s), 20 queries .

Powered by Discuz! X3.2 Licensed

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表