同雪网 SkiChinese.com 北美滑雪论坛

标题: 今天WindChill -32C, 你用了电加热鞋垫吗? [打印本页]

作者: StormRider    时间: 2011-1-23 20:30
标题: 今天WindChill -32C, 你用了电加热鞋垫吗?

作者: kick    时间: 2011-1-23 20:33
沙发            
作者: lupo    时间: 2011-1-23 20:38
这个东西真不错!
作者: arooga    时间: 2011-1-23 20:48
挺贵而且把脚垫的太高boot还要再做定型
作者: arooga    时间: 2011-1-23 20:48
我记得140刀左右?
作者: vicboy™    时间: 2011-1-23 22:44
本帖最后由 vicboy™ 于 2011-1-23 23:45 编辑
StormRider 发表于 2011-1-23 21:30


我有一对,但很少用。因为不许要的时候又要拿出来换鞋垫。很麻烦,不然的话那条连接线挂在鞋后面。
Atomic曾出过代发热鞋垫的鞋,操作上很方便。不过我大脑深思时间过长,等我思考成熟,它不出了。

作者: StormRider    时间: 2011-1-23 22:52
vicboy™ 发表于 2011-1-23 22:44
我有一对,但很少用。因为不许要的时候又要拿出来换鞋垫。很麻烦,不然的话那条连接线挂在鞋后面。
Atomi ...

老大落伍了吧? 挂在后面的连接线不用的时候像条细辫子,那是一种时尚
作者: snowspring    时间: 2011-1-23 23:15
It was freaking cold tonight at BM -24 and windchilll -32.  But my boots were toasty warm thamks to the heater. They are life safers.
作者: 土豆想旅行    时间: 2011-1-23 23:56
多伦多 或者网店哪里卖的便宜啊?
作者: Phoenixtear    时间: 2011-1-24 00:15
偶滑雪史上遇到过的最冷的一天
作者: snowspring    时间: 2011-1-24 08:08
本帖最后由 snowspring 于 2011-1-24 08:09 编辑

回复 Phoenixtear 的帖子

YOu will have many more such days if you ski in Canada!  Enjoy while you can.  Even the snow is not gliding when it goes down to -24.  You need a different wax.   But the nice thing is that we had new snow and nobody was on the slope.  Perfect for doing the big C if you like carving.  
作者: snowspring    时间: 2011-1-24 18:15
回复 土豆想旅行 的帖子

You can check on website and then call shops to check prizes if you want to get the best deal.   
作者: Phoenixtear    时间: 2011-2-1 01:08
去ski&bikes看过了,这个加热鞋垫他们那里卖税前290加币。而且这东西还需要在你的BOOT打洞好穿过电线。。。
作者: vicboy™    时间: 2011-2-1 07:02
回复 Phoenixtear 的帖子

第一次听说要打洞。
作者: david_kate    时间: 2011-2-3 17:18
真的挺贵的,我的靴子是内置好了鞋垫的,但是电池就要180加税...哪位知道有便宜电池卖的地方赶快通知一下啊~~
作者: Phoenixtear    时间: 2011-2-17 21:50
回复 vicboy™ 的帖子

问了ski&bikes里的specialist,问他们如果买了怎么放到boot里,他们就拿了一双BOOT来,现场做给我看的,确实要打洞

作者: vicboy™    时间: 2011-2-17 22:13
Phoenixtear 发表于 2011-2-17 22:50
回复 vicboy™ 的帖子

问了ski&bikes里的specialist,问他们如果买了怎么放到boot里,他们就拿了一双BOOT ...

If you buy a boots with "heater ready" in the liner, there is a hole for the wire to go through, and "guide" for the wire to go up, and clip for the battery. I can show you my boots in this set up.

But, if you buy a boot without special set-up, you can just put the heater bootbed in without punch a hole. I used this way for many years until I found my last boots.





欢迎光临 同雪网 SkiChinese.com 北美滑雪论坛 (http://skichinese.com/skichinese/) Powered by Discuz! X3.2